Services

IS YOUR LASER TUBE DEAD OR DIEING: FOR A FAST AND COST EFFECTIVE REPAIR - CONTACT US NOW IS YOR LASER TUBE DEAD OR DIEING: FOR A FAST AND COST EFFECTIVE REPAIR - CONTACT US NOW IS YOU LASER TUBE DEAD OR DIEING: FOR A FAST AND COST EFFECTIVE REPAIR - CONTACT US NOW

LASER TUBE REPAIR & REPROCESSING

Millennium Lasers has the facilities to reprocess and repair most sealed CO2 laser tubes including

SHARPLAN

KAPLAN

SURGILASE

MLT

LASER ENGINEERING

ULTRA LASERTECH

If we do not succeed with your repair or reprocessing work

THERE IS

NO

CHARGE


500 WATT OEM Power Supply

We will refill your tube to produce the same power as the original manufacturer, if we fail to do so - there is no charge

************

As part of this service we check the alignment of the cavity optics, vacuum integrity and cleanliness of the output coupler

 

Turnaround times are approximately 7-10 days from receipt of goods, which must be sent to us carriage and insurance prepaid

************

The cost of this service is between £400 and £900 depending upon the size and origin of the tube.

DC SWITCH-MODE HIGH VOLTAGE POWER SUPPLIES

GENERAL SPECIFICATIONS

 SPECIFICATION

ML/P500

ML/P300

ML/P100

RATED OUTPUT POWER

500W

300W

100W

MAXIMUM OUTPUT POWER

750W

400W

180W

H.T. POLARITY

POSITIVE OR NEGATIVE

TERMINALS

H.T. & RETURN

RETURN LINE

GROUND & FLOATING OPTION

STRIKE VOLTAGE

>40KV

VOLTAGE RANGE (KV)

2-30

CURRENT RANGE (mA)

1-45

1-25

1-15

CURRENT RISETIME

<20 microsecs

SUPERPULSE REPETITION RATE

1Hz to 5KHz

GATED PULSE REPETITION RATE

1Hz to 5KHz

LASER POWER CONTROL

0 to +5v for min. to max. current

PULSE MODULATION CONTROL

+5v Interrupt @ Modulation Frequency

LASER ENABLE (ON)

+5v Analogue

MAINS INPUTS

230v/115v Selectable @ 50/60 Hz
Single phase 3A to 5A

OPEN FRAME DIMENSIONS (MM)

320(L) * 180(W) * 150(H)

WEIGHT (Kg)

12

10

8


GENERAL NOTES

  1. All units are chassis mounted with integral isolation transformer & mains filter

  2. High overall efficiency of around 90%

  3. No ballast resistors required

  4. Open & short circuit protection included

  5. ML/P500 & ML/P300 are fan cooled

  6. All units conform to en 60101-1 and are EMC compatible

 

home • products • images • services • contact us